A list of the contents of this article:

Can the pruning of asparagus tree survive? the method of branch cutting

1. Hello, you can truncate the branches that are too high, and the branches that are cut off can also be cut alive. Here are some simple ways you can learn from them. The dragon blood tree can also be propagated asexually by cutting, which is from May to June. At this time, it is the exuberant growth period of the dragon blood tree, the plant is rich in nutrition, and it is easy to survive after cutting.

2. Cutting time: May-June in spring is suitable, when it is the exuberant growth period of asparagus, and the survival rate is high. Cutting cuttings: take the sturdy branches that have grown for more than two years, each with a length of 10-20 cm. Prepare potted soil: small earthen pots are better for flowerpots, and the soil should be ventilated. Cuttage: insert the branches directly into the soil.

3. If the branches of the pruned asparagus tree are too tender, do not use soil cuttings, you can try water cuttings, it is also possible to survive. Because the water cutting branches will not lose water, as long as they keep the branches fresh, they will have a chance to take root.

4. The most common propagation method of asparagus is cutting propagation, and the most important thing is the selection of cutting buds; the survival rate of cutting will be greatly improved in spring, and the branch selection of asparagus will be semi-lignified, which can quickly make the branches take root; if it is better on the trunk branch of asparagus, the nutrients in the branches will be more abundant.

5. Select branches: when cutting asparagus, select the semi-lignified and well-developed trunk branches. Treatment of branches: after drying the wounds of the branches of asparagus, soak them in rooting water for half an hour. Cutting method: make a hole in the soil, then insert the branches of asparagus, and fill the soil to cover it.

6. Select cuttings: on the mother plant of asparagus, select healthy and sturdy semi-lignified branches, cut 10-25 cm with sterilized scissors, cut off the lower leaves, retain the upper 2-4 leaves, cut the lower end into oblique sections with a sharp knife, soak the upper and lower branches in clean water and put them in a cool and ventilated place to dry.

Propagation methods, cutting propagation methods and matters needing attention of asparagus chinensis

1. Striping propagation: ring cutting is carried out in the stem position of asparagus. Cutting propagation: the cutting time of the plant is from May to June of each year. Water and fertilizer management: watering every three to five days during the growing period to keep the soil moist. Suitable environment: the asparagus tree needs to be maintained in a sunny, ventilated place.

2. The method of cutting and transplanting (1) move to a position where there is no strong light and maintain it slowly. (2) Transplantation: when the cuttings grow new young leaves and the root system is slightly mature, it can be taken out of the flower soil and transplanted into a new flowerpot.

3. Cuttage propagation: cut more than 2-year-old strong branches from the dragon blood tree as cuttings, dry and sterilize, and stick them into the substrate. Strip propagation: cut the stem in a ring with a knife, then mix the moss and mud evenly, wrap it in the incision and fix it. Growing environment: like a moist and warm environment. Maintenance and management: watering and topdressing regularly.

4. How to maintain flowers and plants how to propagate and maintain (1) soil: the soil planted with asparagus can be prepared with peat soil and perlite, so the soil permeability and drainage are very good. Even if it is raised at home, it has no taste.

5. Cutting time: asparagus is usually cut in May-June in spring, and choose a sunny afternoon. Treatment of branches and buds: prepare to grow robust branches and buds, length between 10-20 cm, soak with disinfectant. Cutting method: dip the root water at the bottom of the branches and buds, and then insert it into the soft and fertile soil.

Cutting methods of asparagus chinensis

Select cuttings: on the mother plant of asparagus, select healthy and sturdy semi-lignified branches, cut 10-25 cm with sterilized scissors, cut off the lower leaves, retain the upper 2-4 leaves, cut the lower end into oblique sections with a sharp knife, soak the upper and lower incisions in clean water and put them in a cool and ventilated place to dry.

If the pruned branches of asparagus are too tender, do not use soil cuttings, you can try water cuttings, it is also possible to survive. The wound should be treated, and the wound at the lower end of the pruned asparagus branch should be properly treated before cutting, otherwise the wound is easy to rot and the cutting fails.

Cutting time: asparagus is usually cut in May-June in spring, choose a sunny afternoon. Treatment of branches and buds: prepare to grow robust branches and buds, length between 10-20 cm, soak with disinfectant. Cutting method: dip the root water at the bottom of the branches and buds, and then insert it into the soft and fertile soil.

Choose a better appearance, and it is best to choose a sturdy branch to operate, and it must be a plant to carry out cutting, to cut the plant into a horizontal incision, cut the top horizontally and leave the leaves.

The cutting method of asparagus in order to ensure the smooth cutting, it is necessary to choose the more robust branches to deal with it.

Leaf cutting method of asparagus chinensis

1. Select cuttings: on the mother plant of asparagus, select healthy and sturdy semi-lignified branches, cut 10-25 cm with sterilized scissors, cut off the lower leaves, retain the upper 2-4 leaves, cut the lower end into oblique sections with a sharp knife, soak the upper and lower branches in clean water and put them in a cool and ventilated place to dry.

2. If the branches of the pruned asparagus tree are too tender, do not use soil cuttings, you can try water cuttings, it is also possible to survive. Because the water cutting branches will not lose water, as long as they keep the branches fresh, they will have a chance to take root.

3, choose the appearance is more good-looking, and it is best to choose a stronger branch to operate, and must be a plant can be cuttage, to cut the plant into a horizontal incision, cut the top horizontally after leaving leaves.

How to cut asparagus tree

Select cuttings: on the mother plant of asparagus, select healthy and sturdy semi-lignified branches, cut 10-25 cm with sterilized scissors, cut off the lower leaves, retain the upper 2-4 leaves, cut the lower end into oblique sections with a sharp knife, soak the upper and lower incisions in clean water and put them in a cool and ventilated place to dry.

Choose a better appearance, and it is best to choose a sturdy branch to operate, and it must be a plant to carry out cutting, to cut the plant into a horizontal incision, cut the top horizontally and leave the leaves.

When selecting branch cutting dragon beard tree, it is best to choose semi-lignified and well-developed trunk branches, and then cut the bottom of the branches at an angle of 45 degrees, keeping the length at about 10 centimeters, and the best time for cutting is every spring.

Can the asparagus tree be cuttable? the asparagus tree can be cutted. when cutting, you need to choose the strong-growing branches as cuttings, and then divide the branches into several segments, each with two nodes, retain aerial roots, remove too many leaves, and leave them to dry. After drying, the branches can be directly inserted into the prepared matrix.

The suitable cutting time for asparagus is around May every year, when the temperature is stable at about 25 ℃, the water content in the air is suitable, the survival rate is high and the growth rate is fast. The southern region can start cutting in April.

Can asparagus tree be cut?

1, cutting propagation (1) time: asparagus money is suitable for cutting in May, when the temperature is already relatively high, which is beneficial to the rooting of the branches of the tree, and the temperature of the cutting environment is stable at about 25 ℃. If the ambient temperature can be controlled, cutting can be carried out at any time.

2. Asparagus pruning can be cut alive, and it is best to cut it in May every year, because the temperature is relatively high at that time, which is beneficial to the rooting of branches. It is necessary to keep the temperature at about 25 degrees when cutting. If the temperature is too low or too high, it is not conducive to its growth and development.

3. If the branches of the pruned asparagus tree are too tender, do not use soil cuttings, you can try water cuttings, it is also possible to survive. The wound should be treated, and the wound at the lower end of the pruned asparagus branch should be properly treated before cutting, otherwise the wound is easy to rot and the cutting fails.

4. The common propagation mode of asparagus is cutting propagation and striping propagation, so it likes the warm environment and is not resistant to low temperature, so it is best carried out in spring and autumn, when the temperature is above 20 degrees Celsius. It is beneficial to rooting and recovery in the later stage.

5. The cutting method of asparagus in order to ensure the smooth cutting, the sturdy branches should be selected for treatment.